ISO 9906 Pump Test Report: A Buyer’s Review Checklist
An ISO 9906 pump test report helps a buyer decide whether a rotodynamic pump meets the hydraulic performance commitments in the purchase order. Start with the agreed test basis, then trace the reported results to the exact pump and duty point ordered.
ISO 9906:2012 describes hydraulic performance acceptance tests for rotodynamic pumps. Use the standard and the project’s purchase documents for the actual acceptance criteria, edition, grade and agreed procedure.
Check the purchase order before reviewing the curve
- Match the pump identification, model, impeller diameter and tested speed to the configuration being accepted.
- Identify the guaranteed flow and head, the agreed grade, and any separately specified efficiency, power or other tests.
- Check which fluid and conditions the report uses, and ask for the basis of any correction or conversion.
Read the operating point with the supporting data
| Report item | Review question |
|---|---|
| Test points and curve | Can you identify the measured points and see how the reported result at the guaranteed duty was obtained? |
| Power and efficiency | Does the report distinguish measured electrical input from pump shaft input where that difference matters? |
| Speed and instruments | Are the speed, instrument references and relevant calibration records identifiable? |
| Acceptance decision | Does the report state the agreed basis and explain any exception or retest? |
Example of a useful review query
Suppose a purchase order calls for 100 m³/h at 40 m head, but the report only shows points on either side of 100 m³/h. Ask the test team to identify the calculation or curve used to evaluate the agreed duty and show the acceptance basis. The example values alone establish no pass or fail outcome.
See Velotech’s guides to comparing pump curves and pump testing software and PLC automation. Contact Velotech Solutions to discuss test bench records, report templates and approvals.
Pingback: How to Read a Centrifugal Pump Curve | Velotech